边界层抽吸对超燃冲压发动机流场特性的影响研究

为了解边界层抽吸对超燃冲压发动机流场的影响,采用风洞试验和数值计算对隔离段激波串特性以及燃烧室燃烧特性进行了研究。结果表明,在发动机入口马赫数2.0,总温950K,总压0.82MPa的来流条件下,当量比为0.18先锋氢气与不同当量比煤油共同燃烧呈不稳定状态,激波串在隔离段内前后振荡传播。当煤油当量比为0.29时,激波串振荡前缘远离抽吸位置,边界层抽吸对发动机流场基本没有影响。随着煤油当量比逐渐增大,激波串前缘位置到达抽吸区附近,边界层抽吸开始产生影响,改变了隔离段内的激波串动态演化过程、形态结构以及位置分布,同时有效提高了隔离段抗反压特性,使得煤油最大当量比可以由0.38增大至0.42。此外,边界层抽吸对发动机内的亚燃/超燃区域分布也会产生影响。     

基于双变量预测控制的表贴式永磁同步电机直接转矩控制系统

基于电压矢量幅值和相角为变量的表贴式永磁同步电机(SPMSM)定子磁链幅值和转矩表达式,给出了9个不同幅值和相角的备选电压矢量,采用预测控制计算得出施加不同电压矢量下一时刻的定子磁链幅值和转矩值,建立了基于磁链和转矩误差的目标函数,并选择使目标函数最小的电压矢量为作为下一时刻施加的最优电压矢量。仿真结果表明:在双变量预测控制下,SPMSM直接转矩控制系统运行良好,定子磁链轨迹为理想圆,磁链和转矩均符合控制要求,转速跟踪良好,定子电流波形正弦。进一步对比分析表明:与开关表和固定电压矢量选择策略相比,双变量预测控制能显著减小转矩和磁链脉动。与开关表相比,转矩脉动均方根误差降低了62.92%,磁链脉动均方根误差降低了45.05%,评价函数均值降低了60.30%；与固定电压矢量选择策略相比,转矩脉动均方根误差降低了22.40%,磁链脉动均方根误差降低了3.85%,评价函数均值降低了15.93%。     

Distributed intelligent self-organized mission planning of multi-UAV for dynamic targets cooperative search-attack

This article studies the cooperative search-attack mission problem with dynamic targets and threats, and presents a Distributed Intelligent Self-Organized Mission Planning (DISOMP) algorithm for multiple Unmanned Aerial Vehicles (multi-UAV). The DISOMP algorithm can be divided into four modules: a search module designed based on the distributed Ant Colony Optimization (ACO) algorithm, an attack module designed based on the Parallel Approach (PA) scheme, a threat avoidance module designed based on the Dubins Curve (DC) and a communication module designed for information exchange among the multi-UAV system and the dynamic environment. A series of simulations of multi-UAV searching and attacking the moving targets are carried out, in which the search-attack mission completeness, execution efficiency and system suitability of the DISOMP algorithm are analyzed. The simulation results exhibit that the DISOMP algorithm based on online distributed down-top strategy is characterized by good flexibility, scalability and adaptability, in the dynamic targets searching and attacking problem.     

基于ICKF的永磁同步电机无传感器控制方法

针对在永磁同步电机(Permanent magnet synchronous motor,PMSM)中安装传感器带来的高成本、体积增大、可靠性降低和易受环境干扰等问题,提出采用迭代容积卡尔曼滤波(Iterative cubature Kalman filter,ICKF)算法来估计电机转速和转子位置,并将其应用于永磁同步电机无传感器控制。首先,建立了PMSM在α-β坐标系下的离散数学模型。其次,在Matlab/Simulink环境下分别建立了基于容积卡尔曼滤波(Cubature Kalman filter,CKF)和ICKF的PMSM转速、电流双闭环的无传感器矢量控制系统仿真模型,并进行了给定转速和加负载两种工况的仿真验证。最后,基于TMS320F28335芯片搭建了硬件实验验证平台。仿真分析与实验结果均表明,迭代容积卡尔曼滤波算法应用于永磁同步电机无传感器控制中抗负载变化干扰性好、电机运行稳定、电机转速和转子位置估计精度高,可满足对电机精确控制要求较高的应用场合,具有重要参考价值和推广意义。     

空间碎片能量转化利用技术

针对目前空间碎片问题，提出空间碎片发动机概念，立足于使用捕获到的空间碎片，转化为发动机可用的推进剂。在完成碎片清理目标的同时，获得可持续的动力来源，延长清理器的工作寿命。针对空间碎片制粉的方法进行研究，提出使用球磨仪对金属样本进行研磨。使用转刀式粉碎机对非金属材料进行粉碎。通过实验发现，多数粉末粒径达到微米量级。针对空间碎片粉末推进方式进行研究，提出使用静电加速推进方式对粉末进行加速。空间碎片发动机虽然起源于空间碎片清理任务，但是可持续的推进剂供应，也将为小行星探测等任务提供更好的思路。     

Solar sails for perturbation relief: Application to asteroids

A major cause of spacecraft orbital variation comes from natural perturbations, which, in close proximity of a body, are dominated by its non-spherical nature. For small bodies, such as asteroids, these effects can be considerable, given their uneven (and uncertain) mass distribution. Solar sail technology is proposed to reduce or eliminate the net secular effects of the irregular gravity field on the orbit. Initially, a sensitivity analysis will be carried out on the system which will show high sensitivity to changes in initial conditions. This presents a challenge for optimisation methods which require an initial guess of the solution. As such, the Genetic Algorithm (GA) is proposed as the preferred optimisation method as this requires no initial guess from the user. A multi-objective optimisation is performed which aims to achieve a periodic orbit whilst also minimising the effort required by the sail to do so. Given the system sensitivity, the control law for one orbit is not necessarily applicable for any subsequent orbit. Therefore, a new method of updating the control law for subsequent orbits is presented, based on linearisation and use of a Control Transition Matrix (CTM). The techniques will later find application in a multiple asteroid rendezvous mission with a solar sail as the primary propulsion system.     

基于上下文区域的飞机数字样机审查方法

为了提高数字样机审查的效率和质量,改善传统的审查方式,提出一种基于上下文区域的飞机数字样机审查方法,确保审查过程的规范性、可追溯性,同时缩短了审查周期并提高了设计质量,实现了飞机数字样机的数字化协调审查。     

基于成本控制的机队优化配置方法

为了控制航空公司运营成本,实现燃油成本和机组时间成本最小,建立多目标整数规划模型,分析各成本因素所占比例,考虑旅客市场需求、航线频率限制、机队飞机寿命限制及飞机适航限制等因素,并采用层次分析法对模型进行求解。通过算例分析和评价,实现航线资源与机队的最优配置,为航空公司降低可变成本提供理论依据。     

飞机数字化装配系统中机身交点孔加工方法研究

针对传统交点孔加工方法加工精度低且存在回弹变形的问题,设计了一种满足飞机大部件数字化装配要求的机身交点孔精加工方法,根据交点孔的加工特性完成了机身定位与固持、数控加工中心定位以及加工工艺的总体设计,确定了交点孔加工程序原点的计算方法和编程原则,最后通过交点孔试切加工试验验证了加工方法的可行性。     

展向离散抽吸法控制边界层转捩实验研究

通过实验成功发展了一种生成大振幅稳定条带的有效方法,即展向离散抽吸方法。在此基础上,开展条带控制边界层转捩的研究。实验在水洞中进行,以零压力梯度平板边界层为研究对象,利用氢气泡时间线法观测引入条带前后人工激发转捩边界层中扰动发展变化,分析条带对转捩的控制效果及参数影响。结果表明,展向离散抽吸方法生成的稳定条带最大振幅可达28.4%U（U为自由流速度）;实验中引入的宽度14和28mm的稳定条带都能起到抑制转捩的作用;条带振幅越大、宽度越窄,抑制效果越明显。研究结果为探索降低水/空气中航行器摩阻的新技术提供有价值的参考。